revits

Making, Pictures, Queries, Resources

Moderator: Moderators

Post Reply
bigrich72
Posts: 12
Joined: Fri Feb 26, 2010 9:56 pm

revits

Post by bigrich72 »

Hi, I hope this is the right place to post, I'm after some bronze rivets to make some C6 kit.

they need to be 2.4mm (3/32nd inch) shank by 10mm (3/8th inch) long with a 4 mm (5/32nd inch) domed head

any idea where I could get them from.

Any help would be appreciated.


ta


Rich

User avatar
Medicus Matt
Post Knight
Posts: 1470
Joined: Mon Jul 18, 2005 1:16 pm
Location: Zummerzet
Contact:

Re: revits

Post by Medicus Matt »

Do they have to bronze? Copper or brass no good to you (given that most 6th C 'bronze' looks more like brass or copper anyway)?
"I never said that I was here to help."

User avatar
Cap-a-pie
Posts: 214
Joined: Wed Aug 15, 2007 11:42 pm
Location: Cardiff
Contact:

Re: revits

Post by Cap-a-pie »

always found these folk to be very good - although not sure if they do bronze

http://www.chronos.ltd.uk/

Mark
Suppliers of Authentic Medieval Maille

http://www.capapie.co.uk

Thomas Hayman
Posts: 334
Joined: Mon Jul 18, 2005 2:24 am

Re: revits

Post by Thomas Hayman »

I think Sapphire do Bronze. Give them a try!
Official Thumb biter.

Post Reply